Show Running-Config Interface - Allied Telesis AR2050V Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG INTERFACE

show running-config interface

Overview This command displays the current configuration of one or more interfaces on the
device.
show running-config interface [<interface-list>] [ip igmp|ip
Syntax
multicast|ip pim dense-mode|ip pim sparse-mode|ipv6
rip|lacp|mstp|ospf|rip|rstp|stp]
C613-50186-01 Rev B
C
OMMANDS
Parameter
<interface-list>
lacp
ip igmp
ip multicast
ip pim sparse-mode Displays running configuration for PIM-SM (Protocol
ip pim dense-mode
mstp
ospf
rip
ipv6 rip
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The interfaces or ports to display information about. An
interface-list can be:
• a PPP interface (e.g. ppp0), an Eth interface (e.g. eth1), a
VLAN (e.g. vlan2), a LAN port (e.g. port1.0.4), a static
channel group (e.g. sa2) or a dynamic (LACP) channel
group (e.g. po2)
• a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups, separated by
a hyphen (e.g. vlan2-8, or port1.0.1-1.0.4, or sa1-2, or
po1-2)
• a comma-separated list of the above (e.g.
vlan2,vlan20-30). Do not mix interface types in a list.
The specified interfaces must exist.
Displays running configuration for LACP (Link Aggregation
Control Protocol) for the specified interfaces.
Displays running configuration for IGMP (Internet Group
Management Protocol) for the specified interfaces.
Displays running configuration for general multicast
settings for the specified interfaces.
Independent Multicast - Sparse Mode) for the specified
interfaces.
Displays running configuration for PIM-DM (Protocol
Independent Multicasting - Dense Mode) for the specified
interfaces.
Displays running configuration for MSTP (Multiple
Spanning Tree Protocol) for the specified interfaces.
Displays running configuration for OSPF (Open Shortest
Path First) for the specified interfaces.
Displays running configuration for RIP (Routing Information
Protocol) for the specified interfaces.
Displays running configuration for RIPng (RIP for IPv6) for
the specified interfaces.
149