Entering System Mode; Camera Settings; Camera Settings - Omron F160 Operation Manual

Entering System Mode

5-1

Entering System Mode

CHECK
5-2

Camera Settings

102
To set conditions related to the system environment it is necessary to enter
System Mode.
1. Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0 MON
S+ENT:Help S+→:Adjust
S+ESC:Set disp
STEP/TRG:Msr S+↑ ↓:Mem img
2. Move the cursor to MON and press the ENT Key.
The mode selections will be displayed.
0.Scn 0 MON
SET
MON
RUN
SYS
TOOL
SAVE
3. Select SYS.
The System Settings Screen will be displayed.
System settings

Camera settings

Communications
Output
Display
Operation settings
Measurement control
Switch menu
Startup mode
↑ ↓
The Output selection cannot be used in the Conversational Menus.
Specify the model of the connected Camera and Intelligent Lighting (if using
any). The model is written on each Unit.
Menu item Models
Camera F150-S1A
F160-S1*
Other
---- ---ms
Freeze
---- ---ms
Details
Select the model of the connected Camera.
Section 5-1