Conveyance Motor/2 (M6) - Konica Minolta bizhub C360 Service Manual

3. OTHER MAINTENANCE ITEM
3.3.13

Conveyance motor/2 (M6)

1. Remove the rear cover.
See P.8
2. Remove the conveyance roller unit.
See P.10
3. Remove the flapper solenoid.
See P.25
4. Remove the conveyance motor/1.
See P.19
[1]
[2]
[3]
8. Reinstall the above parts following the removal steps in reverse.
20
[2]
A0U7F2C021DA
[1]
A0U7F2C022DA
Field Service Ver. 2.0 Jan. 2010
5. Remove two screws [1] and the sole-
noid mounting plate [2].
6. Disconnect the connector [1].
7. Remove three screws [2], and
remove the conveyance motor/2 [3].