3. OTHER MAINTENANCE ITEM
3.3.19
Harness guide
1. Remove the rear cover.
See P.8
2. Remove the FS control board.
See P.15
3. Disconnect the connector [1].
4. Remove the harness from two wire saddles [2].
5. Remove the screw [3], and remove the ground terminal [4].
6. Remove all harness from the harness guide [5].
7. Remove the screw [6], and remove the harness guide [5].
[1]
[2]
8. Reinstall the above parts following the removal steps in reverse.
28
[6]
Field Service Ver. 2.0 Jan. 2010
[5]
[3]
[4]
A0U7F2C041DA