Stapler Movement Motor (M7) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.0 Jan. 2010
3.3.14

Stapler movement motor (M7)

1. Remove the front left cover.
See P.6
2. Remove the rear cover.
See P.8
3. Remove the upper cover.
See P.7
4. Remove the pick up roller position motor.
See P.16
[1]
[1]
A0U7F2C023DA
[1]
[2]
A0U7F2C024DA
[2]
A0U7F2C025DA
3. OTHER MAINTENANCE ITEM
5. Disconnect the connector (CN18) [1]
of the FS control board.
6. Remove the screw [1].
7. Remove the harness from two wire
saddles [2].
8. Remove two screws [1], and remove
the stapler movement motor [2].
21