NEC Univerge sv8500 Manual page 2165

When IP address (=0) is selected
MG(SIP) > set sip_server
SIP server type(0=IP address/1=FQDN):0
SIP server IP address: 192.168.100.100
SIP server port number(1024-65535): 5060
Strict or Loose(0/1): 0
Select the setting of rport(RFC3581) func-
tion.
0=disable (default)
1=enable
Input: 0
Domain Name(MAX128):_
When FQDN (=1) is selected
MG(SIP) > set sip_server
SIP server type(0=IP address/1=FQDN):1
Fully Qualified Domain Name(MAX63):nec.com
SIP server port number(1024-65535): 5060
Strict or Loose(0/1): 0
Domain Name(MAX128):_
Be sure not to enter a space after FQDN characters.
Note:
The rport(RFC3581) function is available for SP-3988 MG SIP(16) PROG-G Issue 3 or later. The follow-
Note 1:
ing conditions are applied to this function.
• Even though the setting of rport(RFC3581) is disabled, the rport parameter can be received.
• INVITE message defined in RFC3581 is not retransmitted.
:
• When IP address (=0) is selected.
• Assign the IP address of the proxy server (default: 0.0.0.0).
• Assign the port number of the proxy server (default: 5060)
• Select a Strict router or Loose router for the proxy server (default:
0).
0: Strict router
1: Loose router
• Enable/disable the rport(RFC3581) function. (default: 0)
• Input a string that specifies the service provider in a maximum of
128 characters.
:
• When FQDN (=1) is selected.
• Assign the FQDN of the proxy server in a maximum of 62 char-
acters (default: 0).
• Assign the port number of the proxy server (default: 5060)
• Select a Strict router or Loose router for the proxy server (default:
0).
0: Strict router
1: Loose router
• Input a string that specifies the service provider in a maximum of
128 characters.
VOL.2-1912
MG-SIP16 [SCA-16SIPMG(US)]
Note 1