Timer Realtime-Accounting - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Set the quiet timer for the primary server to ten minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] timer quiet

1.3.18 timer realtime-accounting

Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Parameter
minutes: Real-time accounting interval, which is a multiple of 3 in the range 3 to 60
minutes.
Description
Use the timer realtime-accounting command to configure a real-time accounting
interval.
Use the undo timer realtime-accounting command to restore the default interval.
By default, the real-time accounting interval is 12 minutes.
Note that:
Real-time accounting interval is necessary for real-time accounting. After an
interval value is set, the switch transmits the accounting information of online
users to the TACACS accounting server at intervals of this value.
The setting of real-time accounting interval depends somewhat on the
performance of the switch and the TACACS server: A shorter interval requires
higher device performance. You are therefore recommended to adopt a longer
interval when there are a large number of users (more than 1000, inclusive). The
following table recommends the real-time accounting intervals for different
numbers of users.
Table 1-7 Recommended intervals for different numbers of users
Number of users
1 – 99
100 – 499
10
Real-time accounting interval (minute)
3
6
Huawei Technologies Proprietary
1-76
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands