Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
1.1.21 ssh-server source-interface
Syntax
ssh-server source-interface interface-type interface-number
undo ssh-server source-interface
View
System view
Parameter
interface-type: Type of source interface, which can be LoopBack or Vlan-interface.
interface-number: Number of source interface.
Description
Use the ssh-server source-interface command to specify source interface for SSH
Server. When the specified interface does not exist, the command prompts the
configuration fails.
Use the undo ssh-server source-interface command to cancel the specified source
interface. Then the address of the device determined by the system is for the user to
access to the switch.
Example
# Specify source interface Vlan-interface 2 for SSH Server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ssh-server source-interface Vlan-interface 2
1.1.22 ssh-server source-ip
Syntax
ssh-server source-ip ip-address
undo ssh-server source-ip
View
System view
Parameter
ip-address: Source IP address needed to set.
Huawei Technologies Proprietary
1-19
Chapter 1 SSH Terminal Service
Configuration Commands