Network - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
value: Cost value of the routes to be imported.
route-policy route-policy-name: Specifies to import only the routes matching the
conditions of the specified route-policy
Description
Use the import-route command to import the routes of another protocol into RIP.
Use the undo import-route command to cancel the routes imported from another
protocol.
By default, RIP does not import routes from other protocols.
The import-route command is used to import the routes of another protocol with a
specified cost.. RIP regards the imported routes as its own routes and transmits them
with the specified cost. This command can greatly enhance the capability of RIP to
obtain routes, thereby improving RIP performance.
If the cost value is not specified, routes will be imported with the default routing cost
(set by the default cost command, ranging from 1 to 16). If the cost of an imported
route is 16, RIP marks the route as HOLD DOWN (however, the route can still be used
to forward packets), and continues to announce the route with this cost to other routers
running RIP until the Garbage Collection timer times out (the timeout time defaults to
120 seconds).
Related command: default cost.
Example
# Import static routes with the cost of 4.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] import-route static cost 4
# Set the default cost and import OSPF routes with the default cost.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] default cost 3
[Quidway-rip] import-route ospf

2.1.10 network

Syntax
network network-address
undo network network-address
Huawei Technologies Proprietary
2-9
Chapter 2 RIP Configuration Commands