File Prompt - Huawei Quidway S3900 series Command Manual

Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
This command executes command lines in the batch file in sequence. Note that the
batch file cannot contain any invisible character. If any invisible character is found, the
command will quit execution and this process is irretrievable.
This command is the automation of executing commands in the batch file manually
except that the command:
Does not guarantee that every command in the file is executed.
Does not perform hot backup.
Does not restrict the forms and contents of commands in the file.
Example
# Execute the batch file named test.bat under the directory flash:/.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] execute test.bat
<Quidway>
....
%Created dir unit1>flash:/test3.

1.2.6 file prompt

Syntax
file prompt { alert | quiet }
View
System view
Parameter
alert: Prompts for confirmation before performing file-related operations that have
potential risks.
quiet: Disables prompts for file-related operations.
Description
Use the file prompt command to configure the prompt mode for file-related operations.
By default, a switch prompts for confirmation before performing file-related operations
that have potential risks.
If you set the prompt mode of the file-related operations to quiet, the switch does not
prompt for confirmation before performing file-related operations. In this case, the
system is more likely to operate improperly if irretrievable file-related operations are
performed. For example, when the prompt mode is set as alert, the following messages
will be displayed when you delete a file:
<Quidway> delete unit1>flash:/te.txt
Chapter 1 File System Management Configuration
Huawei Technologies Proprietary
1-12
Commands