Reset Igmp-Snooping Statistics - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway] igmp-snooping router-aging-time 500

1.1.14 reset igmp-snooping statistics

Syntax
reset igmp-snooping statistics
View
User view
Parameter
None
Description
Use the reset igmp-snooping statistics command to clear IGMP Snooping statistics.
Related command: igmp-snooping.
Example
# Clear IGMP Snooping statistics.
<Quidway> reset igmp-snooping statistics
1.1.15 service-type multicast
Syntax
service-type multicast
undo service-type multicast
View
VLAN view
Parameter
None
Description
Use the service-type multicast command to set the current VLAN as a multicast
VLAN.
Use the undo service-type multicast command to cancel the multicast VLAN setting.
By default, no VLAN is a multicast VLAN.
By configuring a multicast VLAN, adding corresponding switch ports to the multicast
VLAN and enabling IGMP Snooping, you can make users in different VLANs share the
same multicast VLAN. This saves bandwidth since multicast stream is transmitted only
Huawei Technologies Proprietary
1-13
Chapter 1 IGMP Snooping Configuration
Commands