Display Snmp-Agent Usm-User - Huawei Quidway S3900 series Command Manual

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510
View
Any view
Parameter
None
Description
Use the display snmp-agent trap-list command to view Trap list information.
Related command: snmp-agent trap enable.
Example
# Display Trap list information.
<Quidway> display snmp-agent trap-list
configuration trap enable
flash trap enable
ospf trap enable
standard trap enable
system trap enable
vrrp trap disable
Enable traps :5; Disable traps 1

1.1.8 display snmp-agent usm-user

Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group
group-name ]*
View
Any view
Parameter
engineid: Displays the SNMPv3 user information of the specified engine ID, which
ranges from 10 to 64 hexadecimal numerals.
username: Displays information about the specified SNMPv3 user, which ranges from
1 to 32 bytes.
groupname: Displays information about users in the specified group name, which
ranges from 1 to 32 bytes.
Description
Use the display snmp-agent usm-user command to view SNMP user information.
Huawei Technologies Proprietary
1-7
Chapter 1 SNMP Configuration Commands