Ip Route-Static - Huawei Quidway S3900 series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the ip host command to configure a host name and the corresponding IP address
for a switch.
Use the undo ip host command to remove the host name and the corresponding IP
address of a switch.
By default, the host name and the corresponding IP address of a switch are null.
Related command: display ip host.
Example
# Configure the host name and the corresponding IP address of a switch to be
Lanswitch2 and 10.110.0.2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ip host Lanswitch2 10.110.0.2

1.1.17 ip route-static

Syntax
ip route-static ip-address mask { NULL null-interface-number | next-hop }
[ preference preference-value ] [ reject | blackhole ] [ detect-group detect-group-id ]
[ description text ]
undo ip route-static ip-address mask [ NULL null-interface-number | next-hop ]
[ preference preference-value ]
View
System view
Parameter
ip-address: Destination IP address in dotted decimal notation.
mask: IP address mask. The mask length is expressed as dotted decimal notation or
integer in the range of 0 to 32.
NULL null-interface-number: Specifies a null interface. A null interface is a virtual
interface. Packets destined for a null interface is discarded. Null interface helps to
reduce system load.
next-hop: IP address of the next hop of this route, in dotted decimal notation.
preference-value: Preference of this route, in the range of 1 to 255.
reject: Specifies the route to be an unreachable route.
blackhole: Specifies the route to be a blackhole route.
detect-group: Specifies the detect group for the route.
Huawei Technologies Proprietary
1-21
Chapter 1 Management VLAN Configuration
Commands