Ospf Timer Retransmit - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
undo ospf timer poll
View
Interface view
Parameter
seconds: Poll Hello interval in seconds. It ranges from 1 to 65535 and defaults to 40.
Description
Use the ospf timer poll command to configure the poll Hello packet interval on NBMA
and p2mp network.
Use the undo ospf timer poll command to restore the default poll interval.
On an NBMA or p2mp network, if a neighbor becomes invalid, Hello packet will be
transmitted at the interval of poll seconds. You can configure the poll seconds to
specify how often the interface transmits Hello packet before it establishes adjacency
with the adjacent router. Poll seconds should be no less than 3 times of Hello.
Example
# Configure to transmit poll Hello packet through interface Vlan-interface 20 every 130
seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 20
[Quidway-Vlan-interface20] ospf timer poll 130

3.1.43 ospf timer retransmit

Syntax
ospf timer retransmit interval
undo ospf timer retransmit
View
Interface view
Parameter
interval: Interval, in seconds, for retransmitting LSA on an interface. It ranges from 1 to
3600 and defaults to 5.
Description
Use the ospf timer retransmit command to configure the interval for LSA
retransmission on an interface.
Huawei Technologies Proprietary
3-46
Chapter 3 OSPF Configuration Commands