Info-Center Monitor Channel - Huawei Quidway S3900 series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the info-center loghost source command to configure the source interface
through which information is sent to the log host.
Use the undo info-center loghost source command to cancel the source interface
configuration.
Related command: info-center enable and display info-center.
Example
# Configure Vlan-interface 1 as the source interface through which information is sent
to the log host.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center loghost source Vlan-interface 1

1.1.12 info-center monitor channel

Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center monitor channel command to set the channel through which
information is output to user terminals.
Use the undo info-center monitor channel command to disable the information
output.
By default, the switch outputs information to user terminal.
Huawei Technologies Proprietary
1-11
Chapter 1 Information Center Configuration
Commands