Timer Retry - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway] ip ip-prefix list1 permit 130.10.0.0 16 greater-equal 16 less-equal
32
[Quidway] msdp
[Quidway-msdp] peer 130.10.7.6 connect-interface Vlan-interface 100
[Quidway-msdp] static-rpf-peer 130.10.7.6 rp-policy list1

7.1.23 timer retry

Syntax
timer retry seconds
undo timer retry
View
MSDP view
Parameter
seconds: Connection request retry interval in seconds, ranging from 1 to 60.
Description
Use the timer retry command to configure a connection request retry interval.
Use the undo timer retry command to restore the default value.
By default, the connection request retry interval is 30 seconds.
Related command: peer.
Example
# Set the connection request retry interval to 60 seconds.
<Qudiway> system-view
[Quidway] msdp
[Quidway-msdp] timer retry 60
Huawei Technologies Proprietary
7-20
Chapter 7 MSDP Configuration Commands