Mac-Authentication Timer; Reset Mac-Authentication - Huawei Quidway S3900 series Command Manual

Command Manual – Centralized MAC Address Authentication
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway] mac-authentication domain Cams

1.1.9 mac-authentication timer

Syntax
mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value |
server-timeout server-timeout-value }
undo mac-authentication timer { offline-detect | quiet | server-timeout }
View
System view
Parameter
offline-detect-value: Offline detect timer (in seconds) setting. This argument ranges
from 1 to 65,535 and defaults to 300. The offline detect timer sets the time interval for a
switch to test whether a user goes offline.
quiet-value: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and
defaults to 60. After a user fails to pass the authentication performed by a switch, the
switch quiets for a specific period (the quiet period) before it authenticates users again.
server-timeout-value: Server timeout timer setting (in seconds). This argument ranges
from 1 to 65,535 and defaults to 100. During authentication, the switch prohibits a user
from accessing the network through the corresponding port if the connection between
the switch and the RADIUS server times out.
Description
Use the mac-authentication timer command to configure the timers used in
centralized MAC address authentication.
Use the undo mac-authentication timer command to restore a timer to its default
setting.
Related command: display mac-authentication.
Example
# Set the server timeout timer to 150 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] mac-authentication timer server-timeout 150

1.1.10 reset mac-authentication

Syntax
reset mac-authentication statistics [ interface interface-type interface-number ]
Huawei Technologies Proprietary
1-9
Chapter 1 Centralized MAC Address
Authentication Configuration Commands