Port-Security Trap - Huawei Quidway S3900 series Command Manual

Command Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
The time set by the port-security timer disableport command takes effect when the
disableport-temporarily mode is set by the port-security intrusion-mode
command.
Example
# Set the time during which the system temporarily disables a port to 50 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] port-security timer disableport 50

1.1.12 port-security trap

Syntax
port-security trap { addresslearned | intrusion | dot1xlogon | dot1xlogoff |
dot1xlogfailure | ralmlogon | ralmlogoff | ralmlogfailure }*
undo port-security trap { addresslearned | intrusion | dot1xlogon | dot1xlogoff |
dot1xlogfailure | ralmlogon | ralmlogoff | ralmlogfailure }*
View
System view
Parameter
addresslearned: Enables/disables the sending of MAC address learning trap
messages.
intrusion: Enables/disables the sending of intrusion packet discovery trap messages.
dot1xlogon: Enables/disables the sending of 802.1x user logon trap messages.
dot1xlogoff: Enables/disables the sending of 802.1x user logoff trap messages.
dot1xlogfailure: Enables/disables the sending of 802.1x user authentication failure
trap messages.
ralmlogon: Enables/disables the sending of RALM user logon trap messages.
ralmlogoff: Enables/disables the sending of RALM user logoff trap messages.
ralmlogfailure: Enables/disables the sending of RALM user authentication failure trap
messages.
Huawei Technologies Proprietary
1-15
Chapter 1 Port Security Commands