Rip Work - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

2.1.22 rip work

Syntax
rip work
undo rip work
View
Interface view
Parameter
None
Description
Use the rip work command to enable RIP to transmit and receive RIP packets on an
interface.
Use the undo rip work command to disable RIP from transmitting and receiving RIP
packets on an interface.
By default, RIP is enabled from transmitting and receiving RIP packets on an interface.
This command is used in cooperation with rip input, rip output and network
commands.
Related command: network, rip input, rip output.
Example
# Disable RIP from transmitting and receiving RIP packets on the interface
Vlan-interface 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] undo rip work
2.1.23 summary
Syntax
summary
undo summary
View
RIP view
Huawei Technologies Proprietary
2-20
Chapter 2 RIP Configuration Commands