Level - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the idle-cut command to set the user idle-cut function in current ISP domain.
By default, this function is disabled.
Related command: domain.
Example
# Allow users in ISP domain aabbcc.net to enable the idle-cut attribute in user
template (that is, allow the user to use the idle-cut function), with the maximum idle
time of 50 minutes and the minimum data flow of 500 bytes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] domain aabbcc.net
New Domain added.
[Quidway-isp-aabbcc.net] idle-cut enable 50 500

1.1.13 level

Syntax
level level
undo level
View
Local user view
Parameter
level: Priority level of the user. It is an integer ranging from 0 to 3 and defaulting to 0.
Description
Use the level command to set the priority level of the user. The priority level of the
user corresponds to the command level of the user. Refer to the description of the
command-privilege level command in the command line interface module.
Use the undo level command to restore the default priority level of the user.
Note that:
If the configured authentication method is none or requires a password, the
command level that a user can access after login is determined by the level of the
user interface.
If the configured authentication method requires a user name and a password,
the command level that a user can access after login is determined by the priority
level of the user. For SSH users, when they use RSA shared keys for
Huawei Technologies Proprietary
1-15
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands