Import-Source; Msdp - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

7.1.6 import-source

Syntax
import-source [ acl acl-number ]
undo import-source
View
MSDP view
Parameter
acl-number: Basic or advanced IP ACL number, ranging from 2000 to 3999. An ACL
controls SA message advertisement by filtering sources (basic ACL) and filtering
sources or groups (advanced ACL). If you do not specify this argument, no multicast
source is advertised.
Description
Use the import-source command to specify the (S, G) entries in this domain that need
to be advertised when an MSDP peer creates an SA message.
Use the undo import-source command to cancel the configuration.
By default, an SA message advertise all the (S, G) entries in the domain.
In addition, you can also use the peer sa-policy import command or the peer
sa-policy export command to filter forwarded SA messages.
Example
# Specify the (S, G) entries in the multicast routing table to be advertised when an
MSDP peer creates an SA message.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] acl number 3101
[Quidway-acl-adv-3101]
destination 225.1.0.0 0.0.255.255
[Quidway-acl-adv-3101] quit
[Quidway] msdp
[Quidway-msdp] import-source acl 3101

7.1.7 msdp

Syntax
msdp
undo msdp
rule permit
Huawei Technologies Proprietary
7-6
Chapter 7 MSDP Configuration Commands
ip source 10.10.0.0 0.0.255.255