Display Msdp Sa-Count - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

7.1.5 display msdp sa-count

Syntax
display msdp sa-count [ autonomous-system-number ]
View
Any view
Parameter
autonomous-system-number: Specifies the AS where a source and group come from.
The value ranges from 1 to 65535.
Description
Use the display msdp sa-count command to display the number of sources and
groups in MSDP cache.
The debugging output of this command is available only after the configuration of the
cache-sa-enable command.
Example
# View the number of sources and groups in MSDP cache.
<Quidway> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address
10.10.10.10
Number of source and group, counted by AS
AS
100
Total Source-Active entries: 5
Table 7-3 Description on the fields of the display msdp sa-count command
Peer's Address
Number of SA
AS
Number of source
Number of group
Number of SA
5
Number of source
3
Field
Huawei Technologies Proprietary
Chapter 7 MSDP Configuration Commands
Number of group
3
Address of an MSDP peer
Number of SA messages
AS number
Number of sources
Number of groups
7-5
Description