Display Cluster Candidates - Huawei Quidway S3900 series Command Manual

Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510
3 member(s) in the cluster, and 0 of them down.
# Display cluster information (assuming that the current switch is a member device).
[aaa_2.3900-3] display cluster
Cluster name:"aaa"
Role:Member
Member number:2
Management-vlan:100
cluster-mac:0180-c200-000a
Handshake timer:10 sec
Handshake hold-time:60 sec
Administrator device mac address:00e0-fc00-3901
Administrator status:Up
Table 1-5 Description on the fields of the display cluster command
Cluster name
Role
Member number
Handshake timer
Handshake hold-time
Administrator device mac
address
Administrator status

1.3.12 display cluster candidates

Syntax
display cluster candidates [ mac-address H-H-H | verbose ]
View
Any view
Parameter
mac-address H-H-H: Specifies the MAC address of a candidate device.
Field
Huawei Technologies Proprietary
1-26
Chapter 1 HGMPv2 Configuration Commands
Description
Name of the cluster
Cluster role of the switch
Member number of the switch
Value of handshake timer
Handshake holdtime
MAC address of the management
device
State of the management device