Huawei Quidway S3900 series Command Manual page 373

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Use the display ospf peer brief command to display the brief information, including
router ID, interface, and state, about every OSPF peer.
Use the display ospf peer statistics command to display the statistics of every OSPF
peer, namely, the number of peers in various states in every area.
Example
# Display the information about OSPF peer.
<Quidway> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 10.153.17.88(Vlan-interface1)'s neighbor(s)
RouterID: 2.2.2.2
Table 3-10 Description on the fields of the display ospf peer command
RouterID
Address
State
Mode
Priority
DR
BDR
Dead timer expires in 31s
Neighbor has been up for 01:14:14
# Display the brief information about every peer.
<Quidway> display ospf peer brief
Area 0.0.0.1:
State: Full Mode: Nbr is Master
DR: 10.153.17.89 BDR: 10.153.17.88
Dead timer expires in 31s
Neighbor has been up for 01:14:14
Field
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Brief Information
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Address: 10.153.17.89
Priority: 1
Router ID of neighbor router
Address of the interface, through which
neighbor router communicates with the
router
State of adjacency relation
Master/Slave
negotiation in exchanging DD packet
Priority of DR/BDR for neighbor election
IP address of the interface of elected DR
IP address of the interface of elected
BDR
If no hello packet is received from the
peer within this interval, the peer will be
considered to be invalid.
Time of neighbor connection
3-25
Description
mode formed by