Display Logbuffer - Huawei Quidway S3900 series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Table 1-1 Description on the fields of the display info-center command
Information Center:
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Information
setting
IRF
Device--Unit>1

1.1.3 display logbuffer

Syntax
display logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude
| include } regular-expression ]
View
Any view
Parameter
unit-id: Unit ID.
level severity: Specifies an information severity level. The severity argument ranges
from 1 to 8.
Field
Information center is enabled.
Information about the log host, including its IP address,
name and number of information channel, language
and level of the log host
Information about the console port, including name and
channel of its information channel
Information about the monitor port, including name and
channel of its information channel
Information about SNMP Agent, including name and
number of its information channel
Information about the log buffer, including its state
(enabled or disabled), its maximum size, current size,
current messages, information channel name and
number,
messages
Information about the trap buffer, including its state
(enabled or disabled), maximum size, current size,
current messages, channel number and name,
dropped messages, and overwritten messages
Information about time stamp setting, describing log
timestamp
information, trap information, and the time stamp format
of the debugging information
Information about the state of the device (enabled or
SWITCH OF
disabled), describing whether the log, trap and
debugging information are enabled on the device.
Huawei Technologies Proprietary
Chapter 1 Information Center Configuration
Description
dropped messages,
1-3
Commands
and overwritten