Dhcp Server Ip-Pool - Huawei Quidway S3900 series Command Manual

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
When you execute the undo dhcp server forbidden-ip command, make sure that
the specified address range does not contain any statically bound IP address.
You can configure multiple IP address segments that are not to be automatically
configured by executing the dhcp server forbidden-ip command several times.
If an IP address that is not to be automatically assigned has been configured as a
statically-bound IP address, the DHCP server still assigns this IP address to the
client whose MAC address has been bound.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Forbid the IP addresses in the range 10.110.1.1 to 10.110.1.63 to be automatically
assigned.
[Quidway] dhcp server forbidden-ip 10.110.1.1 10.110.1.63

1.1.11 dhcp server ip-pool

Syntax
dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
View
System view
Parameter
pool-name: Name of a DHCP address pool, which uniquely identifies the address pool.
This argument is a string of 1 to 35 characters.
Description
Use the dhcp server ip-pool command to create a global DHCP address pool and
enter DHCP address pool view. If the address pool identified by the pool-name
argument already exists, this command leads you to DHCP address pool view.
Use the undo dhcp server ip-pool command to remove a specified DHCP address
pool.
By default, no global DHCP address pool is created.
Related command: dhcp enable.
Huawei Technologies Proprietary
1-12
Chapter 1 DHCP Server Configuration
Commands