Display Pim Bsr-Info - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
address. For the C-RP messages received, only when their C-RP addresses match the
source address and their server group addresses are subset of those in ACL, can the
be considered as matched.
Related command: acl, and rule.
Example
# Configure C-RP filtering policy on the C-BSR routers, allowing only 1.1.1.1/32 as
C-RP and to serve only for the groups 225.1.0.0/16.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] multicast routing-enable
[Quidway] pim
[Quidway-pim] crp-policy 3000
[Quidway-pim] quit
[Quidway] acl number 3000
[Quidway-acl-adv-3000] rule 0 permit source 1.1.1.1 0 destination 225.1.0.0
0.0.255.255

6.1.5 display pim bsr-info

Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr-info command to view the BSR information.
Related command: c-bsr, and c-rp.
Example
# Display the BSR information.
<Quidway> display pim bsr-info
Current BSR Address: 20.20.20.30
Local host is BSR
Priority: 0
Mask Length: 30
Expires: 00:01:55
Huawei Technologies Proprietary
Chapter 6 PIM Configuration Commands
6-5