Restore Startup-Configuration From - Huawei Quidway S3900 series Command Manual

Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
# Back up the current configuration of the whole fabric to the file aaa.cfg on the TFTP
server with IP address 1.1.1.253.
<Quidway> backup fabric current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to 1.1.1.253. Please wait...
File will be transferred in binary mode.
Copying file to remote tftp server. Please wait...
TFTP:
File uploaded successfully.
Unit 7: Backup current configuration finished!
Unit 8: Backup current configuration finished!

1.3.2 restore startup-configuration from

Syntax
restore { unit unit-id | fabric } startup-configuration from { source-addr |
source-hostname } filename.cfg
View
User view
Parameter
unit-id: Unit ID of a switch.
fabric: Specifies the whole fabric system.
source-addr: Host name or IP address of a TFTP server.
source-hostname: Host name of a TFTP server
filename.cfg: Name of the configuration file to be downloaded, a string of 5 to 56
characters (including the extension .cfg).
Description
Use the restore unit startup-configuration from command to restore the startup
configuration of a specified switch from a file on a TFTP server.
Use the restore fabric startup-configuration from command to restore the startup
configuration of the whole fabric from a file on a TFTP server.
Example
# Restore the startup configuration of unit 7 from the file aaa.cfg on the TFTP server
with the IP address 1.1.1.253.
<Quidway> restore unit 7 startup-configuration from 1.1.1.253 aaa.cfg
Restore startup configuration from 1.1.1.253. Please wait...
2029 bytes sent in 0 second(s).
Huawei Technologies Proprietary
1-22
Chapter 1 File System Management Configuration
Commands