Voice Vlan Aging - Huawei Quidway S3900 series Command Manual

Command Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Caution:
When you are enabling voice VLAN function for a specified VLAN, the specified
VLAN must exist, otherwise, your configuration fails.
If you want to delete a VLAN with voice VLAN function enabled, you must disable
the voice VLAN function first.
The voice VLAN function can be enabled for only one VLAN at the same time.
Related command: display voice vlan status.
Example
# Create VLAN 2, and enable the voice VLAN function for it.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] quit
[Quidway] voice vlan 2 enable
# After the voice function of VLAN2 is enabled, if you enable the voice VLAN function
for other VLANs, the system will prompt that your configuration fails.
[Quidway] voice vlan 4 enable
Can't change voice vlan configuration when other voice vlan is running

1.1.6 voice vlan aging

Syntax
voice vlan aging minutes
undo voice vlan aging
View
System view
Parameter
minutes: Aging time (in minutes) to be set for a voice VLAN. This argument ranges from
5 to 43,200 and defaults to 1,440.
Description
Use the voice vlan aging command to set the aging time for a voice VLAN.
Use the undo voice vlan aging command to restore the default aging time for a voice
VLAN.
Chapter 1 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
1-5