Huawei Quidway S3900 series Command Manual page 733

Command Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510
net-unreachable
parameter-problem
port-unreachable
protocol-unreachable
reassembly-timeout
source-quench
source-route-failed
timestamp-reply
timestamp-request
ttl-exceeded
2) Parameters of the undo rule command:
rule-id: Rule ID, which must the ID of an existing ACL rule. If no other arguments are
specified, the system will completely delete this ACL rule. If any argument is given, the
system will delete only the specified information of the ACL rule.
source: Deletes the settings of the source address part in the rule corresponding to
the rule ID.
source-port: Deletes the settings of the source port part in the rule corresponding to
the rule ID. This keyword is available only when TCP or UDP is defined in the rule.
destination: Deletes the settings of the destination address part in the rule
corresponding to the rule ID.
destination-port: Deletes the settings of the destination port part in the rule
corresponding to the rule ID. This keyword is available only when TCP or UDP is
defined in the rule.
icmp-type: Deletes the settings of the ICMP type and message code part in the rule
corresponding to the rule ID. This keyword is available only when ICMP is defined in
the rule.
precedence: Deletes the precedence-related settings in the rule corresponding to the
rule ID.
tos: Deletes the ToS-related settings in the rule corresponding to the rule ID.
dscp: Deletes the DSCP-related settings in the rule corresponding to the rule ID.
time-range: Deletes the time range settings in the rule corresponding to the rule ID.
Name
Type=3
Type=12
Type=3
Type=3
Type=11
Type=4
Type=3
Type=14
Type=13
Type=11
Huawei Technologies Proprietary
ICMP TYPE
1-13
Chapter 1 ACL Commands
ICMP CODE
Code=0
Code=0
Code=3
Code=2
Code=1
Code=0
Code=5
Code=0
Code=0
Code=0