Gvrp Configuration Commands; Display Gvrp Statistics - Huawei Quidway S3900 series Command Manual

Command Manual – GVRP
Quidway S3900 Series Ethernet Switches-Release
1510
Example
# Clear GARP statistics of all ports.
<Quidway> reset garp statistics

1.2 GVRP Configuration Commands

1.2.1 display gvrp statistics

Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Parameter
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index lists for this argument.
Description
Use the display gvrp statistics command to display the GVRP statistics of specified
or all trunk ports.
This command displays the following information:
GVRP status
Number of the GVRP entries that fail to be registered
Source MAC address of the previous GVRP PDU
GVRP registration type of a port
Example
# Display the GVRP statistics of port Ethernet1/0/1, assuming that the port is a trunk
port.
<Quidway> display gvrp statistics interface Ethernet1/0/1
GVRP statistics on port Ethernet1/0/1
GVRP Status
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Huawei Technologies Proprietary
Chapter 1 GVRP Configuration Commands
: Enabled
: 0
: 0000-0000-0000
: Normal
1-6