Reboot - Huawei Quidway S3900 series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
View
Any view
Parameter
None
Description
Use the display schedule reboot command to display information about scheduled

reboot.

Related command: reboot, schedule reboot at.
Example
# Display the information about scheduled reboot.
<Quidway> display schedule reboot
System will reboot at 16:00:00 2002/11/1 (in 2 hours and 5 minutes).
3.1.10 reboot
Syntax
reboot [ unit unit-id ]
View
User view
Parameter
unit-id: Unit ID of a switch.
Description
Use the reboot command to restart a specified Ethernet switch.
Note:
When rebooting, the system checks whether there is any configuration change. If there
is, it prompts you to indicate whether or not to proceed. This prevents you from losing
your original configuration due to oblivion after system reboot.
Example
# Directly restart this switch without saving the current configuration.
<Quidway> reboot
Huawei Technologies Proprietary
3-7
Chapter 3 Device Management Commands