Schedule Reboot At - Huawei Quidway S3900 series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
This will reboot device. Continue? [Y/N] y
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration may be lost in next
starup if you continue.
<Quidway>
%Apr 2 00:06:01:148 2000 Quidway DEV/5/DEV_LOG:- 1 -
Switch is rebooted.
Starting......

3.1.11 schedule reboot at

Syntax
schedule reboot at hh:mm [ mm/dd/yyyy | yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameter
hh:mm: Reboot time, where hh (hour) ranges from 0 to 23, and mm (minute) ranges
from 0 to 59.
mm/dd/yyyy or yyyy/mm/dd: Reboot date, where yyyy (year) ranges from 2,000 to
2,099, mm (month) ranges from 1 to 12, and the range of dd (day) depends on the
specific month. You cannot set the date later than 30 days than the system current
date.
Description
Use the schedule reboot at command to schedule a reboot on the current switch and
set the reboot date and time.
Use the undo schedule reboot command to cancel the scheduled reboot.
By default, no scheduled reboot is set on the switch.
Note:
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after reaching the specified reboot date and time.
Continue? [Y/N] y
Huawei Technologies Proprietary
3-8
Chapter 3 Device Management Commands