Reset Msdp Peer - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
peer-address: IP address of an MSDP peer, the SA request messages sent from which
will be filtered
acl-number: basic IP ACL number, describing a multicast group address, in the range
of 2000 to 2999. If no ACL is specified, all SA request messages will be ignored.
Description
Use the peer sa-request-policy command to limit the SA request messages the router
receives from an MSDP peer.
Use the undo peer sa-request-policy command to remove the limitation.
By default, the router receives all SA request messages from the MSDP peer.
If no ACL is specified, all SA requests will be ignored. If an ACL is specified, only those
SA request messages from the groups that match the ACL rule will be processed while
others are ignored.
Related command: peer.
Example
# Configure an ACL so that SA request messages from the group address range of
225.1.1.0/24 and from the MSDP peer 175.58.6.5 are received while other SA
messages are ignored.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] acl number 2001
[Quidway-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Quidway-acl-basic-2001] quit
[Quidway] msdp
[Quidway-msdp] peer 175.58.6.5 sa-request-policy acl 2001

7.1.18 reset msdp peer

Syntax
reset msdp peer peer-address
View
User view
Parameter
peer-address: IP address of the MSDP peer
Huawei Technologies Proprietary
7-16
Chapter 7 MSDP Configuration Commands