Display Ip Routing-Table Radix - Huawei Quidway S3900 series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
The information about the OSPF protocol cannot be displayed on S3900-SI series
switches.
Example
# Display the summary information about all the direct routes.
<Quidway> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask
20.1.1.1/32
127.0.0.0/8
127.0.0.1/32
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
210.0.0.1/32
# Display the summary information about the static routing table.
<Quidway> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
1.2.3.0/24
Refer to Table 1-4 for the description on the output fields.

1.1.11 display ip routing-table radix

Syntax
display ip routing-table radix
View
Any view
Protocol Pre Cost
DIRECT 0
DIRECT 0
DIRECT 0
Protocol Pre
DIRECT 0
Protocol Pre Cost
STATIC 60 0
Huawei Technologies Proprietary
1-15
Chapter 1 Management VLAN Configuration
Nexthop
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
Cost Nexthop
0 127.0.0.1
Nexthop
1.2.4.5
Commands
Interface
InLoopBack0
InLoopBack0
InLoopBack0
Interface
InLoopBack0
Interface
Vlan-interface1