Delete Static-Routes All; Static Route Configuration Commands - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
**Destination: 1.1.1.1
**Destination: 2.2.2.0
First, display statistics of the whole routing table. Then, output detailed information of
every route entry in turn. Table 1-2 shows the meaning of route status. Table 1-5 shows
routing table statistics.
Table 1-5 Description on the fields of the display ip routing-table verbose command
Holddown
Delete
Hidden

1.2 Static Route Configuration Commands

1.2.1 delete static-routes all

Syntax
delete static-routes all
View
System view
Routes: 3
Delete: 62
Protocol: #DIRECT
*NextHop: 1.1.1.1
State: <Int ActiveU Retain Unicast>
Age: 20:17:41 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Cost: 0/0
Protocol: #DIRECT
*NextHop: 2.2.2.1
State: <Int ActiveU Retain Unicast>
Age: 20:08:05 Cost: 0/0
Field
Huawei Technologies Proprietary
Chapter 1 Static Route Configuration
Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 1.1.1.1(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.0
Preference: 0
Interface: 2.2.2.1(Vlan-interface2)
Number of held-down routes
Number of deleted routes
Number of hidden routes
1-14
Commands
* = Next hop in use
Description