Secondary Accounting - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
undo retry stop-accounting
View
RADIUS scheme view
Parameter
retry-times:
stop-accounting requests, ranging from 10 to 65535 and defaulting to 500.
Description
Use the retry stop-accounting command to set the maximum number of
transmission attempts of the stop-accounting requests buffered due to no response.
Use the undo retry stop-accounting command to restore the default maximum
number of transmission attempts of the buffered stop-accounting requests.
Stop-accounting requests are critical to billing and will eventually affect the charges of
the users; they are important for both the users and the ISP. Therefore, the switch
should do its best to transmit them to the RADIUS accounting server. If the RADIUS
server does not respond to such a request, the switch should first buffer the request
on itself, and then retransmit the request to the RADIUS accounting server until it gets
a response, or the maximum number of transmission attempts is reached (in this case,
it discards the request).
Related command: reset stop-accounting-buffer, radius scheme and display
stop-accounting-buffer.
Example
# In RADIUS scheme radius1, specify that the switch can transmit a buffered
stop-accounting request at most 1000 times
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] retry stop-accounting 1000

1.2.23 secondary accounting

Syntax
secondary accounting ip-address [ port-number ]
undo secondary accounting
View
RADIUS scheme view
Maximum number
Huawei Technologies Proprietary
1-51
Chapter 1 AAA & RADIUS & HWTACACS
of transmission attempts
Configuration Commands
of the buffered