Fabric-Port Enable - Huawei Quidway S3900 series Command Manual

Command Manual – IRF Fabric
Quidway S3900 Series Ethernet Switches-Release 1510
%Apr 2 19:43:24:368 2000 Quidway FTM/3/FTMCHIDAUTO:- 1 -Change unitid to auto
successful, unit 1 removed UnitID from flash!
Unit 2 removed unit ID successfully.
Unit 3 removed unit ID successfully.
Unit 4 removed unit ID successfully.
Unit 5 removed unit ID successfully.
Unit 6 removed unit ID successfully.
Unit 7 removed unit ID successfully.
Unit 8 removed unit ID successfully.
<Quidway> display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 1
UID CPU-Mac
*1 00e0-fc00-5002 10
2 00e0-fc03-5132 10
3 00e0-fc04-5252 10
4 00e0-fc05-8922 10
5 000f-cbb7-2142 10
6 000f-cbb7-3264 10
7 000f-cbb7-2260 10
8 000f-cbb7-2734 10
From the above example, you can see the priority of each unit restores to 10 and the
numbering mode changes from M (manual numbering) to A (automatic numbering).

1.1.8 fabric-port enable

Syntax
fabric-port interface-type interface-number enable
undo fabric-port interface-type interface-number enable
View
System view
Parameter
interface-type: Type of the port to be configured as a fabric port. Note that only
GigabitEthernet ports can be configured as fabric ports.
interface-number: Number of the port to be configured as a fabric port.
Description
Use the fabric-port enable command to configure a specified port as a fabric port.
Use the undo fabric-port enable command to disable the fabric port function for a port.
When the last fabric port on a switch is disabled, the fabric function is disabled globally.
Priority Stack-Port Board-ID A/M
/Right 1
Left/
/Right 1
Left/
/Right 1
Left/
/Right 1
Left/
Huawei Technologies Proprietary
1-8
Chapter 1 IRF Fabric Commands
A
1 A
A
1 A
A
1 A
A
1 A