Dot1X - Huawei Quidway S3900 series Command Manual

Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510
Port Control Type is Mac-based
Max number of on-line users
...

1.1.2 dot1x

Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view, Ethernet port view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.
The interface-name argument is the port index of an Ethernet port and can be specified
in this form: interface-name = { interface-type interface-num }, in which, interface-type
specifies the type of a port and interface-num identifies the port number. Note that the
interface name after the keyword to must have an interface-num that is greater than or
equal to that of the interface-name before to. &<1-10> means that up to 10 port
indexes/port index lists can be provided,
Description
Use the dot1x command to enable 802.1x globally or for specified Ethernet ports.
Use the undo dot1x command to disable 802.1x globally or for specified Ethernet
ports.
By default, 802.1x is disabled globally and also on all ports
When being executed in system view, the dot1x command enables 802.1x globally if
you do not provide the interface-list argument. And if you specify the interface-list
argument, the command enables 802.1x for the specified Ethernet ports. When being
executed in Ethernet port view, this command enables 802.1x for the current Ethernet
port only. In this case, the interface-list argument is not needed.
You can perform 802.1x-related configurations (globally or on specified ports) either
before or after 802.1x is enabled. If you do not previously perform other 802.1x-related
Field
The port access control method is MAC-based.
That is, supplicant systems are authenticated
based on their MAC addresses.
The maximum number of online users that the port
can accommodate
Information omitted here
Huawei Technologies Proprietary
1-5
Chapter 1 802.1x Configuration Commands
Description