Display Qos-Interface Traffic-Limit - Huawei Quidway S3900 series Command Manual

Command Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
switch; if you specify that argument, you will view the rate limit configuration of a
specific port.
Example
# Display the rate limit configuration of a specific port.
<Quidway]> display qos-interface 1 line-rate
Ethernet1/0/1: line-rate
Inbound: 128 kbps

1.1.5 display qos-interface traffic-limit

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-limit
View
Any view
Parameter
interface-type interface-number: Port index.
unit-id: Unit ID of the switch.
Description
Use the display qos-interface traffic-limit command to view the traffic limit
configuration of a port or all the ports of a switch, including the applied ACLs for traffic
limit, committed average rate (CAR), and the corresponding actions.
Related command: traffic-limit.
Example
# Display the traffic limit configuration.
<Quidway> display qos-interface Ethernet1/0/1 traffic-limit
Ethernet1/0/1: traffic-limit
Inbound:
Matches: Acl 3001 rule 1
Target rate: 640 Kbps
Exceed action: remark-dscp 4
running
Huawei Technologies Proprietary
1-4
Chapter 1 QoS Commands