Memory Auto-Establish Enable - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
By default, when the free memory of the switch recovers to a safety value, connections
of all the routing protocols will always recover (when the free memory of the switch
decreases to a lower limit, the connection will be disconnected forcibly).
After this command is used, connections of all the routing protocols will not recover
when the free memory of the switch recovers to a safety value. In this case, you need to
restart the routing protocol to recover the connections.
Use this command with caution.
Related command: memory auto-establish enable, memory { safety | limit },
display memory limit.
Example
# Disable automatic restoration of the routing protocol connections when the free
memory of the current switch recovers.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] memory auto-establish disable

5.1.4 memory auto-establish enable

Syntax
memory auto-establish enable
View
System view
Parameter
None
Description
Use the memory auto-establish enable command to enable automatic restoration of
routing protocol connections when the free memory of the switch recovers to the
specified value.
Use the memory auto-establish disable command to disable this function.
By default, when the free memory of the switch recovers to a safety value, connections
of all the routing protocols will always recover (when the free memory of the switch
decreases to a lower limit, the connection will be disconnected forcibly).
By default, this function is enabled.
Related command: memory auto-establish disable, memory { safety | limit },
display memory limit.
Huawei Technologies Proprietary
5-4
Chapter 5 Route Capacity Configuration
Commands