Bye - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Specify to transfer files in binary mode.
[ftp] binary
200 Type set to I.

1.2.3 bye

Syntax
bye
View
FTP client view
Parameter
None
Description
Use the bye command to terminate the control connection and data connection with
the remote FTP server and quit to user view.
This command has the same effect as that of the quit command.
Example
# Enter FTP client view.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Terminate the connections with the remote FTP server and quit to user view.
[ftp] bye
221 Server closing.
Huawei Technologies Proprietary
1-8
Chapter 1 FTP and TFTP