Timer Quiet - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the secondary authorization command to configure a secondary HWTACACS
authorization server.
Use the .undo secondary authorization command to delete the configured
secondary authorization server.
Note that:
You are not allowed to assign the same IP address to both primary and
secondary authorization servers.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove an authorization server only when it is not being used by any
active TCP connections.
Related command: display hwtacacs.
Example
# Configure the secondary authorization server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] secondary authorization 10.163.155.13 49

1.3.17 timer quiet

Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Parameter
minutes: Length of the timer in minutes, in the range of 1 to 255. By default, the
primary server must wait five minutes before it resumes the active state.
Description
Use the timer quiet command to set the duration that a primary server must wait
before it can resume the active state.
Use the undo timer quiet command to restore the default (five minutes).
Related command: display hwtacac.
Huawei Technologies Proprietary
1-75
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands