Mac-Address Timer - Huawei Quidway S3900 series Command Manual

Command Manual – MAC Address Table
Quidway S3900 Series Ethernet Switches-Release 1510
View
Ethernet port view
Parameter
count: Maximum number of MAC addresses a port can learn. This argument ranges
from 0 to 4,096. A value of 0 disables the port from learning MAC addresses.
Description
Use the mac-address max-mac-count command to set the maximum number of MAC
addresses an Ethernet port can learn.
Use the undo mac-address max-mac-count command to cancel the limitation on the
number of MAC addresses an Ethernet port can learn.
By default, the number of MAC addresses an Ethernet port can learn is unlimited.
When you use the mac-address max-mac-count command, the port stops learning
MAC addresses after the number of MAC addresses it learned reaches the value of the
count argument you provided. You can use the undo command to cancel this limit so
that the port can learn an unlimited number of MAC addresses. By default, the port
learns an unlimited number of MAC addresses.
Related command: mac-address, mac-address timer.
Example
# Set the maximum number of MAC addresses Ethernet1/0/3 port can learn to 600.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/3
[Quidway-Ethernet1/0/3] mac-address max-mac-count 600

1.1.5 mac-address timer

Syntax
mac-address timer { aging age | no-aging }
undo mac-address timer aging
View
System view
Parameter
aging age: Specifies the aging time (in seconds) for layer 2 dynamic MAC address
entries. The age argument ranges from 10 to 1000000 and defaults to 300.
no-aging: Specifies not to age dynamic MAC address entries.
Huawei Technologies Proprietary
1-6
Chapter 1 MAC Address Table Configuration
Commands