Udp Helper Configuration Commands - Huawei Quidway S3900 series Command Manual

Command Manual – UDP Helper
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 UDP Helper Configuration Commands

1.1 UDP Helper Configuration Commands

1.1.1 display udp-helper server
Syntax
display udp-helper server [ interface Vlan-interface vlan-id ]
View
Any view
Parameter
vlan-id: VLAN interface number.
Description
Use the display udp-helper server command to display the information of the
destination server corresponding to the VLAN interface.
Example
# Display the information of the destination server corresponding to VLAN interface 1.
<Quidway> display udp-helper server interface Vlan-interface 1
interface name
Vlan-interface1
The information above shows that the IP address of the destination server
corresponding to VLAN interface 1 is 192.1.1.2, and no packets have been forwarded.
1.1.2 reset udp-helper packet
Syntax
reset udp-helper packet
View
User view
Parameter
None
Chapter 1
server address
192.1.1.2
Huawei Technologies Proprietary
1-1
UDP Helper Configuration Commands
packets send
0