Terminal Monitor; Terminal Trapping - Huawei Quidway S3900 series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
By default, log terminal display is enabled for console users and terminal users.
Example
# Disable log terminal display.
<Quidway> undo terminal logging

1.1.24 terminal monitor

Syntax
terminal monitor
undo terminal monitor
View
User view
Parameter
None
Description
Use the terminal monitor command to enable the debugging/log/trap terminal display
function.
Use the undo terminal monitor command to disable the function.
By default, this function is enabled for console users and terminal users.
This command works only on the current terminal. Only after the command has been
executed in user view, can the debugging/log/trap information be output on the current
terminal. Disabling the function has the same effect as executing the following three
commands: undo terminal debugging, undo terminal logging and undo terminal
trapping. That is, no debugging/log/trap information will be displayed on the current
terminal. If the function is enabled, you can run the terminal debugging/undo
terminal debugging, terminal logging/undo terminal logging or terminal
trapping/undo terminal trapping command to enable or disable debug/log/trap
terminal output respectively.
Example
# Disable terminal display.
<Quidway> undo terminal monitor

1.1.25 terminal trapping

Syntax
terminal trapping
Huawei Technologies Proprietary
1-24
Chapter 1 Information Center Configuration
Commands