Nas-Ip - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Create a network access server granted by the RADIUS authentication server with
an IP address of 10.110.1.2 and a shared key of aabbcc.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-server nas-ip 10.110.1.2 key aabbcc

1.2.11 nas-ip

Syntax
nas-ip ip-address
undo nas-ip
View
RADIUS scheme view
Parameter
ip-address: Source IP address for RADIUS packets, an IP address of this device. This
address can neither be the all zero address nor be a Class-D address.
Description
Use the nas-ip command to set the source IP address used by the switch to send
RADIUS packets.
Use the undo nas-ip command to remove the source IP address setting.
By default, the IP address of the outbound interface is used as the source IP address
of the packet.
Note:
The nas-ip command in RADIUS scheme view has the same function as the radius
nas-ip command in system view; and the priority of configuration in RADIUS scheme
view is higher than in system view.
You can specify the source IP address used to send RADIUS packets to prevent the
unreachability of the packets returned from the server due to physical interface
trouble. It is recommended to use the loopback interface address as the source IP
address.
Related command: display radius scheme, radius nas-ip.
Huawei Technologies Proprietary
1-40
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands