Static-Bind Client-Identifier; Static-Bind Ip-Address - Huawei Quidway S3900 series Command Manual

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510

1.1.37 static-bind client-identifier

Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Parameter
client-identifier: Client ID to be bound, in the format of H-H-H. It contains 3 to 160
hexadecimal numbers.
Description
Use the static-bind client-identifier command to configure a client ID to be statically
bound.
Use the undo static-bind client-identifier command to delete a client ID that is
statically bound.
By default, no client ID is statically bound.
Note that:
The static-bind client-identifier command must be used together with the
static-bind ip-address command, to respectively specify a statically bound client
ID and an IP address.
If you execute this command or the static-bind mac-address command
repeatedly, the new configuration overwrites the previous one.
Related command: dhcp server ip-pool, static-bind ip-address, and static-bind
mac-address.
Example# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Bind the host aaaa-bbbb with the IP address 10.1.1.1. The mask is 255.255.255.0.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Quidway-dhcp-pool-0] static-bind client-identifier aaaa-bbbb

1.1.38 static-bind ip-address

Syntax
static-bind ip-address ip-address [mask mask ]
Huawei Technologies Proprietary
1-40
Chapter 1 DHCP Server Configuration
Commands