Display Radius Scheme - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Acct Receive:

1.2.5 display radius scheme

Syntax
display radius [ radius-scheme-name ]
View
Any view
Parameter
radius-scheme-name: Name of a RADIUS scheme, a character string of up to 32
characters.
Description
Use the display radius scheme command to display the configuration information
about one specific or all RADIUS schemes
Related command: radius scheme.
Example
# Display the configuration information about all RADIUS schemes.
<Quidway> display radius scheme
------------------------------------------------------------------
SchemeName
Primary Auth IP
Primary Acct IP
Second
Second
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min)
Username format
Data flow unit
Packet unit
unit 1 :
Primary Auth State=active,
Primary Acc
20
=system
=127.0.0.1
=127.0.0.1
Auth IP =0.0.0.0
Acct IP =0.0.0.0
State=active,
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Acct Send:
Index=0
Port=1645
Port=1646
Port=1812
Port=1813
Second Auth State=block
Second Acc State=block
1-32
Configuration Commands
20
Type=huawei
=5
=5
=without-domain
=Byte
=1