Peer Connect-Interface; Peer Sa-Policy - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway-msdp] peer 125.10.7.6 sa-cache-maximum 100

7.1.15 peer connect-interface

Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
View
MSDP view
Parameter
peer-address: IP address of the MSDP peer.
interface-type interface-number: Interface type and interface number. The local router
uses the primary address of this interface as the source IP to establish TCP connection
with the remote MSDP peer.
Description
Use the peer connect-interface command to configure a MSDP peer.
Use the undo peer connect-interface command to disable the configured MSDP
peer.
If the MSDP router of the local router is also a BGP peer, the MSDP peer and the BGP
peer must use the same IP addresses.
Related command: static-rpf-peer.
Example
# Configure the router whose IP address is 125.10 .7.6 as the MSDP peer of the local
router.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] msdp
[Quidway-msdp] peer 125.10.7.6 connect-interface Vlan-interface 100

7.1.16 peer sa-policy

Syntax
peer peer-address sa-policy { import | export } [ acl acl-number ]
undo peer peer-address sa-policy { import | export }
Huawei Technologies Proprietary
7-14
Chapter 7 MSDP Configuration Commands